Shut - Cisco Nexus 7000 Series Reference Manual

S Commands

shut

To shut down an Ethernet Switched Port Analyzer (SPAN) session, use the shut command. To enable a
SPAN session, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
Monitor-common configuration (config-monitor)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to shut down a SPAN session:
switch(config)# monitor session 1
switch(config-monitor)# shut
This example shows how to enable a SPAN session:
switch(config-monitor)# no shut
switch(config-monitor)#
Related Commands Command
monitor session
show monitor session
OL-25806-03
shut
no shut
Modification
This command was introduced.
Description
Enters the monitor configuration mode.
Displays the virtual SPAN or ERSPAN configuration.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
shut
371