Removing The Feed Motor Assembly - JVC DD-8E Service Manual

3.3.4 Removing the Feed motor assembly

(See Fig.10)
(1) Remove the one screw F attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor bard.
3.3.5 Removing the Spindle motor assembly
(See Fig.11)
(1) Remove the two screws G attaching the spindle motor from
spindle motor board.
1-30 (No.MB563)
Splder part
Middle gear
Lead screw
H
Fig.10
G
Fig.11
F
Spindle motor
Spindle motor