Connecting To Audio Equipment; Connecting To Remote Control Mouse Receiver - Philips ProScreen PXG10 User Manual

7. INSTALLATION
CONNECTING TO AUDIO EQUIPMENT/THE REMOTE CONTROL MOUSE RECEIVER
General
– The figures in brackets (1) correspond to the figures in the diagram on page 10.
– The characters in brackets (A) correspond to characters in fig. 3 on page 4.

CONNECTING TO AUDIO EQUIPMENT

CAUTION!
Always turn off the projector while connecting to audio
components, in order to protect both the projector and the
components being connected. By using external audio
components, the volume can be amplified for better sound.
Computer - RGB / Component inputs Computer - RGB / Component inputs
Data 1 in (15pin) Data 2 in
Data 1 in (15pin) Data 2 in
Audio 1 Audio 1
Data 1 in (BNC) Data 1 in (BNC)
15pin 15pin BNC BNC R (Pr) R (Pr) G/G sync (Y) G/G sync (Y) B (Pb) B (Pb)
APPARATEN SKALL APPARATEN SKALL
Audio in Video in Data out
Audio in Video in Data out
ANSLUTAS TILL ANSLUTAS TILL
JODAT UTTAG.
JODAT UTTAG. L R
L R
110-120V / 220-240V~ 110-120V / 220-240V~
RS-232C RS-232C S-Video in S-Video in
• Connect the Audio in L/R sockets of an amplifier or stereo
system to the Audio out socket (G) of the projector.
For this, use an audio connection cable (optional) .
Connecting to audio equipment/remote control mouse receiver
Audio 2 Audio 2
HD (C sync) HD (C sync) VD VD
Audio out
Audio out
(G)
Optional
L Audio R L Audio R
in in
CONNECTING THE REMOTE CONTROL MOUSE RECEIVER
When the RS-232C port on the projector is connected to a
computer with an RS-232C cable (cross type, sold separately),
the computer can be used to control the projector and check
the status of the projector. See page 25 for details.
Computer
Data out Mouse Mouse
Data out
• Connect the supplied USB mouse receiver to the
corresponding USB terminal on the PC.
CAUTION!
– The minimum system requirements for the USB mouse
receiver are Windows 98 and/or Windows NT 5.0 or higher.
USB USB
Audio out Audio out
(8)
13