Configuring The Device; Using Barcode Reader - Siemens SIMATIC ITP1000 Operating Instructions Manual

4.1.3

Configuring the device

You can configure various functions of the device with the "IPC Configuration Center"
software, for example:
● Display brightness
● Key assignment
● Screen saver
Open the IPC Configuration Center
1. Double-click the corresponding icon on your desktop:
Call the documentation on IPC Configuration Center
The can find documentation on the IPC Configuration Center on the supplied USB stick in
the "Tablet Drivers and Tools" manual ("itp_tdt_user_manual" file).
4.1.4

Using barcode reader

You can find information on the position of the barcode reader in the section "Front
(Page 13)".
The barcode reader is freely configurable.
Technical support is available from SIEMENS Customized Automation
(hhttp://w3.siemens.com/mcms/human-machine-interface/en/customized-
products/Pages/Default.aspx).
Scanning barcode
1. Press and hold down the function key to activate the barcode reader. Refer to the
Configuration of the function keys (Page 17).
2. Pass the red LED light (Aiming LED) over the barcode.
3. The barcode is output at the current cursor position of an opened program.
SIMATIC ITP1000
Operating Instructions, 05/2017, A5E37340160-AB
Devise functions and operating the device
4.1 Notes on operation
45