Ir Codes; Remote Control Ir Code; Output Waveform - HP LD4201 User Manual

[x][b][][Set ID][][Data][Cr]
[Data]
Acknowledgement
[b][][Set ID][][OK][Data][x]
[Data]

IR codes

Use this method to connect your wired remote control port on the display.

Remote Control IR Code

Output waveform

Single pulse, modulated with 37.917kHz signal at 455kHz
Carrier Frequency
FCAR = 1/Tc=fosc/12
Duty Ratio = T1/Tc = 1/3
126 Appendix C Command reference
2nd Draft
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
B0H: Display port(HD-DVD)
C0H: Display port(PC)
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
B0H: Display port(HD-DVD)
C0H: Display port(PC)
ENWW