Base Station Settings; Adding New Handsets - D-Link DHA-130 User Manual

Base Station Settings

The Base Setup menu is used when there are more than one handset used or when there is more than one base station used. This is also where the base station can
be reset to the factory default settings.

Adding New Handsets

If you are planning to use multiple handsets for a single base station, it will be necessary to register the added handset in order to be recognized by the base
station. This process involves first activating the registration process from the base station, then configuring the new handset being added and requires a
negotiation process to be initiated from the base station with which the added handset will associate.
Activate the Base Station
When you are ready to add a handset, press and hold the Intercom button on the front of the
base station for 5 seconds. You should see the LED indicators of the front of the base station
blink, alternating between the green and amber LEDs.
Press Intercom button
60