Siemens SIMATIC IPC627D Operating Manual page 18

BIOS Setup (SCU)
3.4 Advanced menu
Parameter
CAN
The following Setup parameters are visible if "CAN" is enabled.
•
•
Onboard PROFINET
(X3 P1, X3 P2, X3 P3)
PROFINET
The following Setup parameter is visible if "Onboard PROFINET" is enabled:
•
•
PCI – MPI / DP
Audio
Azalia
Azalia internal HDMI
codec
Onboard Ethernet 1
(LAN 1, X1 P1)
Onboard Ethernet 1
Address
Onboard Ethernet 2
(LAN 2, X2 P1)
Onboard Ethernet 2
Address
18
Meaning
Enabled
2
Disabled
Auto
5000, 5400, 5800,
Base I/O Address
5C00
IRQ5, IRQ7, IRQ10 The interrupt is pre-assigned and also
Interrupt
Enables (Enabled) or disables (Disabled) the PROFINET port on the
motherboard.
2
MAC and PROFINET address.
MAC Address
Layer 2
MAC Address
PROFINET
Enables (Enabled) or disables (Disabled) of the MPI/DP or PROFINET
2
port on the motherboard.
Enabled
3
Auto
Disabled
Enables (Enabled) or disables (Disabled) the audio Codec of the
Intel onboard sound card.
Enables (Enabled) or disables (Disabled) the Ethernet 1 port on the
motherboard.
The Ethernet address is displayed below this.
Displays the specific MAC address of the Ethernet 1 port
7
Enables (Enabled) or disables (Disabled) the Ethernet 2 port on the
motherboard.
The Ethernet address is displayed below this.
Displays the specific MAC address of the Ethernet 2 port
Enables the CAN interface. You can then set
I/O base address and interrupt.
Disables the CAN interface. This releases the
resources it used.
Automatically configures the CAN Bus port. BIOS
switches on the CAN Bus port. Re-configuration
allocates the resources in the operating system.
Re-configuration also sets the mode.
The I/O base address is pre-assigned and also
recommended.
recommended.
Enables the onboard Azalia HD (High Definition)
audio controller.
Automatically detects the audio codec.
Disables the onboard Azalia HD (High Definition)
audio controller.
Operating Manual, 05/2016, A5E33664825-AB
BIOS Description