CHAPTER 3: INTERFACES
TRIGGER TIME & DATE
Display the time & date of the
Trigger
Display graph values
at the corresponding
cursor line. Cursor
lines are identified by
their colors.
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
FILE NAME
Indicates the
file name and
complete path
CURSOR
(if saved)
LINES
To move lines locate the mouse pointer
over the cursor line then click and drag
the cursor to the new location.
7.
The method of customizing the datalog view is the same as the Waveform Capture
described below.
8.
The datalog can be set to capture another buffer by clicking on Run (when Continuous
mode is enabled), or by clicking on Release (when Continuous mode is disabled).
CURSOR LINE POSITION
Indicate the cursor line position
in time with respect to the
trigger time
SOFTWARE SETUP
DELTA
Indicates time difference
between the two cursor lines
TRIGGER LINE
Indicates the
point in time for
the trigger
3–33