OPERATING
HANDBOOK
Complementary instructions for starting up a machine with gas
heating.
Note: do not forget to open the stop valve on the gas supply line before starting to use the
machine, and then close it again after use.
The ignition of the burner is delayed by 30 seconds following the start command in order to
allow for the pre-ventilation of the combustion chamber.
The machine will be ready for use after the message has disappeared :
"Error Gas Ignition".
The noise at the inter-ignition is not an explosion. It is a normal phenomenon.
3. Method of use
01103040
0409
Notice
Date
4
3
Page