Advertisement
Electromagnetic
Compatibility Directive
European Electromagnetic
Compatibility (EMC) for
Industrial Control
Equipment
Maritime Society
Certification
5.2 Conditions of Safe Use for Installation in
Hazardous Locations
The following information applies to products bearing
the UL marking for Hazardous areas and the ATEX
marking for Zone 2 explosive atmospheres:
•
Suitable for use in Class I Division 2 Groups
A, B, C, D (applicable to 7'', 10'', 12'', 15'' Display
units).
•
Suitable for use in Class I Division 2 Groups
A, B, C, D; Class 2 Division 2 Groups F, G; Class
3 Division 1 and Division 2 (applicable only to
only 6'' Display unit).
•
Suitable for Group II, Category 3, Gas Groups IIC,
Dust Group IIIC (applicable only to the
IC755CxS12CDBCA and IC755CxS15CDACA
Display units):
1.
GFK-2893K
No
marking
The equipment shall only be used in an
area of at least pollution degree 2, as
defined in IEC 60664-1.
Note: Pollution degree 2 can be
achieved when the installation is in a
controlled environment with suitably
controlled condensation or airborne
pollution.
QuickPanel
Quick Start Guide
+
Self-declaration in
accordance with
European Directives
EN61000-6-2,
EN61000-6-4
Det Norske Veritas (DNV)
certification only applies to
+
QuickPanel
7'' Display
unit (part number
IC755CSW07CDACA)
35
Advertisement
