Overview Of The Front Side Of The Wireless Adsl Modem Router; Overview Of The Rear Side Of The Wireless Adsl Modem Router - Philips CGA7740N Quick Start Manual

2.3 Overview of the front side of the wireless ADSL modem
router
A B C D
A
ON : Power on, normal operation
OFF : Power off or failure
B
ON : ADSL loop is brought up
Blinking : Start up
OFF : ADSL loop is down
C
ON : Internet connection is up
OFF : No data transfering
D
ON : Wireless link is up
Blinking : Send / Receive data
OFF : No data transfering
E
ON : Success
Flash Flash : In progress
Blinking : Fail
OFF : No connection
F
ON : Ethernet connection is established
Blinking : Send / Receive data
OFF : Without link
G button
Push and hold this button for 3 seconds to install another WPS device
on your network (see "WPS", page 12).
4
WPS
E F
G
2.4 Overview of the rear side of the wireless ADSL modem
router
A
A ADSL port
ADSL port (RJ-11). Connect your ADSL line to this port.
B LAN ports
10/100 Ethernet ports (RJ-45). Connect devices to your local area
network on these ports (i.e., a PC, hub, or switch).
C Reset button
Use this button to reset the power and restore the default factory
settings. To reset without losing configuration settings, see "Reset",
page 15.
D Power Inlet
Connect the included power adapter to this inlet
!
Warning
Using the wrong type of power adapter may damage the ADSL Wireless
Base Station.
For use only with power supply "Leader : MU12-2150080-C5" and / or
"Jentec : AH1215-E".
E ON / OFF
Button to switch unit ON / OFF
I
o
B C D E
Your Wireless ADSL Modem Router