Panasonic AG-520VDH Service Manual page 14

Vcr
Hide thumbs Also See for AG-520VDH:
Table of Contents

Advertisement

AG-520VDH
5.1.10. TRACKING CENTER MODE
(TRACKING FIX AT CENTER)
Insert the Cassette tape. Set the unit into Service Mode.
Press CH UP on the unit and CH DOWN buttons on the remote
together in play back mode.
In this mode, the tracking is fixed at center. (Auto tracking and
manual tracking functions are not operational.)
5.1.11. DEFEATING THE AUTO TRACKING
To defeat the Auto Tracking Function, place the instrument in
the STOP mode and place a jumper between TP6003 and
TP6009 on the Main C.B.A. The tracking will be placed in the
neutral position.
Fig. 7-3
Fig. 8
5.1.12. CAUTION FOR INSTALLATION OF
VCR/DVD ASS'Y
CAUTION:
Opener Lever may be damaged when VCR/DVD Ass'y is
installed, with Cassette Door-Lid and Opener Lever of
Cassette Up Ass'y set incorrectly.
Install the VCR/DVD Ass'y as follows:
1. Swing the Cassette Door-Lid all the way open until the
Cassette Door tab clears the Opener Lever.
2. Make sure that all guide tabs are aligned properly. Then,
press the VCR/DVD Ass'y straight in.
14
Fig. 9

Advertisement

Table of Contents
loading

Table of Contents