Nokia Smart Home User Manual page 50

Unpairing and deleting
1 . To delete a Z-Wave device, you must
first unpair it from the ONT (as explained
below) . When you delete a ZigBee device,
it is automatically unpaired from the ONT
[Figure 1] .
2 . To unpair a Z-Wave device from the ONT,
click on the green icon at the bottom of
the Smart Home screen . It will expand to
show four options [Figure 2] .
Click on Unpair Devices .
3 . The ONT goes into the Unpairing mode
[Figure 3a] .
When the device has successfully unpaired,
you will see a Done message [Figure 3b] .
If the unpairing mode times out, the
screen in Figure 3c tells you unpairing
has failed .
Figure 3a
50 Nokia Smart Home user guide
Figure 3b
Figure 1
Figure 2
Figure 3c