Hitachi Compute Blade 500 Series Web Console Users Manual page 153

OS Administrator's Guide for details. If Network OS version 2.0.1 runs on
a Brocade 10 Gb DCB switch module, you cannot configure the gateway.
Tip: If you uncheck "Not apply this Default Gateway setting to the LAN switch
module." the default gateway setting of the internal LAN switch is changed by
the management module, which may affect your network.
IP Address (IPv6) tab
Item
Module Shows the type of module and the module number.
Assignment Displays the static address.
method
(The only assignment method that can be specified is static
addressing.)
IP Address (IPv6) Shows the IPv6 address, prefix length, and default gateway specified
for the management interface of the module.
Prefix Len
If static addressing is disabled, ----- is displayed.
Default Gateway
Table 2-162 Action button at the bottom
Item
Edit Edits the IP address (IPv6) settings of the management interface.
Hitachi Compute Blade 500 Series Web Console User's Guide
Table 2-161 IP address(v6) items
Description
Operating the Web Console
Description
2-143