ABB COM600 series User Manual page 17

1MRS752278 COM600 series, Version 5.0
IEC 60870-5-103 Master (OPC) User's Manual
Figure 3.2-1 Example view of SAB600
The configuration work can basically be divided into two separate tasks:
1. building an object tree, and
2. configuring object properties.
First, you need to build an object tree. This is done by adding objects to the object tree,
see 3.3.1, General information about building object tree . Connectivity Packages for
certain Protection and Control products usually contain preconfigurations and tools to
facilitate the building of the object tree.
Figure 3.2-1 shows an example of how the object tree may look like after it has been
built. In the example tree you can see the IEC103 OPC Server object and its child objects
like channels, devices, and data objects. Indentation is used to indicate the parent-child
relationship between the objects.
After you have added the necessary objects to the object tree in the communication
structure, you need to configure them, see 3.4.1, General information about configuring
objects.
Table 3.2-1 describes the objects shown in the object tree (Figure 3.2-1 ).
Table 3.2-1 IEC103 Server related objects
Object
IEC103 OPC Server
Description
An object representing the IEC103 OPC Server.
SAB600_IEC103_Example_View.png
17