7.
Tie all of the cords into a bundle. If other cords are exposed in the upper cabinets, tie them
also.
8.
Close the cabinet cover and secure the outside screw.
9.
Cover the cords with the cord holder (included).
10.
Fix the cords to the wall as shown so that the front cover can be opened.
Note
If two expansion units are installed, cut the cabinet cover(s) on the lower cabinet(s) to allow
the cords from upper cabinet to go down through the cabinet cover(s). To protect the cords,
smooth the cut edges.
General Installation
Cord holder
Cut here
2.4 Installation of Optional Cards and Unit
87