Handling
This chapter explains the basic handling methods for this product.
Changing the Orientation of the Display Unit
The angle and direction of the display unit can be changed by holding the struts with your hand while moving
the display unit.
The display unit will move with only light pressure, so do not apply more pressure once the unit stops moving.
Applying excess force to move the display unit may cause damage.
When installed in the TM printer, there may be situations where the display unit cannot be turned to the
desired direction. In these situations, remove the customer display and base unit, then adjust the position of the
lug in the base unit before reattaching.
DM-D110
48
DM-D110 for TM-T88V-DT
You can change the direction or angle of the display and L-shaped pole by moving them while holding TM-
T88V-DT by hand.
With a L-shaped pole
48
DM-D210
36
90
270
300
330
With a straight pole
48
300
Chapter 3 Handling
3
69