Removing And Replacing The Display Assembly - Motorola A1000 Service Manual

Disassembly

Removing and Replacing the Display Assembly

G
30
To remove the Display Assembly
1. Follow the procedures to remove the:
• Battery Door
• Battery
• USIM Card
• Rear Housing
• Transceiver board
• Joystick Assembly
2. Using the disassembly tool, disengage the display flex from its connector.
3. Release the display assembly clips from the transceiver on each side of the
display assembly as shown in Figure 16.
The flexible printed cable connecting the display module to the display board is
fragile. Use extreme care when handling.
Display Flex
Connector
Figure 16. Removing the Display Flex Connector
4. Carefully disengage the 2 display locking tabs (1 one each side of the display).
5. Carefully lift the display assembly away from the transceiver board.
October 4, 2004
A1000
Disassembly
Tool
6809490A77-O