Software Re-Installation - Philips MCP9360i Service Manual

EN 62 13.

13. Software Re-installation

If the problem is not hardware related and it was also not solved by any of the software repair methods, the only option left is to re-install
a software image that is known to work.
Caution: Performing a system re-installation will result in the loss of all user data.
1. Insert the DVD with the latest disc image (provided by Philips).
2. Reboot the MCP9360i.
3. Press 'F' for the full recovery option.
4. Press 'Y' to continue.
5. After 25 minutes the new image will have been installed.
In some cases it might be possible that the set does not boot from the DVD (although this was the default setting). In that case:
1. Reboot the MCP9360i again.
2. During the boot process, press 'F2' to enter the BIOS settings.
3. In the boot order list: add the optical drive to the top of the list.
4. Reboot again and continue with the re-installation.
MCP9360i Software Re-installation