Table of Contents
Advertisement
4.2
4i-3i cooktop base
The following image shows the 4I cooktop base. All of the parts that
comprise the appliance are assembled on this part.
The base therefore has the following elements:
206_58300000105199_ara_en_h – 15.03.a
Tabs (2), clips and holes (2) for
fastening the induction electronics
boards.
Tabs and clips for fastening the
Touch Control board.
Mounts (2) and stubs (2) for
fastening the fan by two screws.
Mounts (8) for fastening the
inductor assemblies (2),
suspended using springs.
Holes (12) around the perimeter
of the part for fastening the
frame/glass unit using screws,
and pins for installation on rails
(Komfort models).
Seite 10 von 66
Hide quick links:
Advertisement
Table of Contents
