To Control The Volume; Notes On Operating Your Components - Sony RM-VZ800T Operating Instructions Manual

To control the volume

Press w +/– to control the
volume. Press % to mute the
sound.
When you select a visual
component, the TV's volume will
be controlled (TV Component
Select button lights up), and when
you select an audio component,
the amplifier's volume will be
controlled (AMP Component
Select button lights up). You can
change this setting also (page 23).
Notes
• If you used the Learning function
(page 14) to programme the w +/–
or % buttons to send a signal to any
other component, that signal will be
transmitted instead of the volume or
muting of the TV or amplifier when
you select that component.
• If you used the Learning function
(page 14) to programme the w +/–
or % buttons for the TV or AMP to
send a signal to any other
component, that signal will be
transmitted only when you select TV
or AMP. When you select another
component, the preset volume control
signals for TV or AMP will be
transmitted.
• If you have assigned another
component to the TV or AMP buttons
(page 30), the volume of the TV or
amplifier cannot be controlled even if
you select another component.
Notes on operating your
components
When you use a double cassette
deck
1 If the remote control for your
deck has a Deck A/B select
control, the
Commander has the
corresponding function.
2 If you cannot select Deck A/B
with the
number code for either one of
the decks, and
•set the function controls for
the other deck to other free
buttons (for example, the
Number buttons) using the
Learning function (page 14),
•assign the other deck to
another Component Select
button (page 30).
button on your
button, first set the
or
13
GB