[1 6] [N EXT] [AB] [SELECT] [MEMORY] [END]
or
�-- - - - -
Description
During a conversation, call wa iting tone will be
heard when the third party on the outside or
intercom calls you.
Call waiting tone can be removed or added at
customer's request.
Set to "ENA BLE" for call waiting.
Programming
1 .
Dial (1 6) .
"CA L L WAITING " will be displayed.
2.
Press the NEXT button.
"ENTER EXT NO" will be displayed.
3.
Press the NEXT button.
"11 : DISA BLE" will be displayed and
"DISABLE" will blink.
4.
Press the SELECT button, to alternate between
ENABLE and DISA BLE to select the desired
mode.
until the desired extension n umber appears
5.
Press the MEMOR Y button.
The blinking L CD will stop.
6.
Repeat steps 3 to 5, to program the assign
ment of the other extensions.
7.
To return to the initial program mode, press
the END button .
Conditions
When you start the programming from step 1 ,
ll!l
jftu may dial the desired extension n umber
instead of the NEXT button at step 3.
• Th e PREV button allows you to go to the
previous extension for displaying the call
waiting selection.
Programming Table
See page 5-I6.
2- 24