NEC UNIVERGE SV8100 Features & Specifications Manual page 906

Issue 5.0
Program
Number
20-11-14
20-11-15
20-11-16
20-11-17
20-11-18
20-11-19
20-11-20
20-11-21
20-11-22
20-11-23
1 - 896
Program Name
Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
Class of Service Options (Hold/
Transfer Service) – VRS
Personal Greeting (Message
Greeting)
Class of Service Options (Hold/
Transfer Service) – Call Redirect
Class of Service Options (Hold/
Transfer Service) – Department
Group Trunk-to-Trunk Transfer
(Each Telephone Group
Transfer)
Class of Service Options (Hold/
Transfer Service) – No Recall
Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
Class of Service Options (Hold/
Transfer Service) – No Callback
Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
Class of Service Options (Hold/
Transfer Service) – Restrict
Unsupervised Conference
Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
Description/Comments
Turns Off (0) or On (1) the
Trunk-to-Trunk Transfer
Restriction. If enabled,
Trunk-to-Trunk Transfer is not
possible.
Turn off or on an extension ability
to dial Service Code 716 to
record, listen to or erase the
Personal Greeting Message.
Turn On (1) or Off (0) a multiline
terminal user's ability to transfer a
call to a pre-defined destination
(such as an operator, voice mail,
or another extension) without
answering the call.
Turn On (1) or Off (0) the ability of
an extension in a Department
Group to use the Trunk-to-Trunk
Forwarding service codes.
Allow (0) or deny (1) answered
Transferred calls from recalling the
originating extension.
Determine whether an extension
Class of Service should allow
normal or extended Park
(0 = Normal for Program 24-01-06,
1 = Extended for Program
24-01-07).
Turn off or on an extension ability
to receive Callbacks.
Allow (0) or deny (1) an extension
users's ability to set up a tandem/
conference call automatically
when they hang up.
Allow or Deny an extensions
ability to initiate a Trunk-to-Trunk
Transfer (Tandem Trunking).
In an extension Class of Service,
turn On (1) or Off (0) the ability to
set and cancel Call Forwarding for
a CAR or Virtual Extension.
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
SLT Adapter