Samsung OfficeServ 7200 Programming Manual page 184

CHAPTER 2. MMC Programming
[506] TONE CADENCE
Provides the ability to customize the tone cadence on a system-wide basis. The system pro-
vides 11 types of tone and three types of tone provided from Central Office or a PBX sys-
tem can be detected.
Please call Technical Support before changing any cadences as some systems may re-
quire default settings.
No Item
00 BUSY TONE
01 CONFM/BARGE
02 DIAL TONE
03 DND/NO MORE
04 ERROR TONE
05 HOLD/CAMPON
06 MSGWAT TONE
07 RGBACK TONE
08 RING TONE
09 TRANSFER
TONE
10 DID RNGBACK
11 CO BUSY
12 CO RINGBACK
13 CO DIAL
DEFAULT DATA
TONE
BUSY TONE
CONFIRM/BARGE-IN
DIAL TONE
Samsung Business Communications
The called station is busy.
A feature has been successfully activated/cleared or a Barge-In with
Tone has been performed.
The system is ready to interpret key presses/dialled digits.
The called station is in DND or has no free CALL buttons.
An error has been made.
This is the system generated hold tone.
This is the tone heard at an SLT with a message waiting.
The called station is ringing.
This is the tone heard from a ROP device or Loud Bell when these de-
vices are called.
This is the tone heard when the transfer button is pressed or an SLT
hook flashes.
This is the tone heard by the outside party when they dial a DID number.
This is used to detect the busy tone provided from Central Office or a PBX
system.
This is used to detect the ring back tone provided from Central Office or
PBX system.
This is used to detect the dial tone provided from Central Office or PBX
system.
ON
500
200
OfficServ 7200 Programming Guide
Description
OFF ON
500 500
200 200
CONTINUOUS
(unit: milliseconds)
OFF
500
5000
2-153