Ip Filter Setting - Mitsubishi Electric GOT2000 Series User Manual

2.5

IP Filter Setting

2.5.1 IP filter setting
IP addresses from which access to the GOT is allowed or blocked can be set.
For the details of the IP filter setting, refer to the following.
➠
Item
IP filter usage
Access from the following address
Range
Target IP address
Exception IP address
*1 Leave the boxes blank if you do not set any IP addresses.
GT Designer3 (GOT2000) Screen Design Manual
You can set whether to use or not the IP filter function.
You can set whether to allow or block access from the IP addresses that set
in the filtering list.
• If [Transmit] is selected
Access from the IP addresses that are set for [Target IP address] is
blocked.
Access from the IP addresses that are set for [Exception IP address] is
disallowed.
• If [Block] is selected
Access from the IP addresses that are set for [Target IP address] is
blocked.
Access from the IP addresses that are set for [Exception IP address] is
allowed.
You can set whether to register IP addresses by specifying a range.
To specify a range, set the start IP address and the end IP address for
[Target IP address].
You can set IP addresses or IP address ranges to be filtered.
Up to 32 ranges can be set.
This item can be set only when [Range] is selected.
For an IP address range specified in [Target IP address], set IP addresses
excluded from being filtered.
Up to 32 addresses can be set for one range specified in [Target IP
address].
Description Setting range
Yes/No
<Default: No>
Transmit/Block
<Default: Transmit>
Selected/Not selected
<Default: Not selected>
0.0.0.0 to 255.255.255.255
<Default: Blank>
0.0.0.0 to 255.255.255.255
<Default: Blank>
2.5 IP Filter Setting
2
*1
*1
2 - 19