Siemens GIGASET SE681 WIMAX User Manual page 12

Product overview
LEDs
Online: active connection
Power: power supply
The LEDs indicate the status of the Gigaset SE681 WiMAX and the current signal
strength.
Name
Power: power
supply
Online: active
connection
LAN: Ethernet
port
RSSI: signal
strength
12
LAN: Ethernet port
LED
Lights up green
Does not light up
Lights up green
Does not light up
Flashes green
Lights up red
Lights up green
Does not light up
Flashes green
0 to 4 LEDs light
up green
All 4 LEDs flash
green
RSSI: signal strength
Meaning
The Gigaset SE681 WiMAX is powered cor-
rectly.
The Gigaset SE681 WiMAX is not powered
correctly or the power supply has failed.
The Gigaset SE681 WiMAX is registered with
a WiMAX network and ready for use.
The Gigaset SE681 WiMAX is not registered
with a WiMAX network; it is not possible to
establish an Internet connection.
The Gigaset SE681 WiMAX is establishing a
connection with a WiMAX network.
The Gigaset SE681 WiMAX is not ready. Pos-
sible cause: device is overheating or faulty.
Correct cable connection with a powered
connection partner.
No or incorrect cable connection.
Data transfer via the Ethernet port.
The LEDs on the Gigaset SE681 WiMAX help
you to position the antenna more easily. The
LEDs indicate the signal strength; the more
LEDs that light up, the better the signal
reception.
The Gigaset SE681 WiMAX is being reset to
the factory settings; see "Returning the
Gigaset SE681 WiMAX to factory settings" on
page 19.