Installing The Upper Handle; Operation; Product Overview; Connecting To A Power Source - Toro 1500 Power Curve 38371 Operator's Manual

Setup
Note: Determine the left and right sides of the appliance from
the normal operating position.

Installing the Upper Handle

1. Remove the handle knobs, oval bolts, and curved washers
from the lower handle.
2. Install the upper handle to the lower handle of the appliance
with the handle knobs, curved washers, and oval bolts as
shown in Figure 1.
1. Handle knob (2)
2. Curved washer (2)
3. Oval bolt (2)
Note: Ensure that the power cord attached to the appliance
is routed over the lower handle and to the inside of the
handle assembly.
3. Tighten the handle knobs firmly by hand.
4. Attach the cord guide to the handle (Figure 2).
Figure 1
4. Lower handle
5. Upper handle
1. Cord guide
2. Handle

Operation

Product Overview

1
2
3
1. Upper handle
2. Interlock key
3. Power cord
4. Bail
5. Cord lock
6. Handle knobs
Important: This appliance is intended for outdoor, residential
use only. Do not use it indoors or for commercial or industrial
purposes.

Connecting to a Power Source

To reduce the risk of electric shock, this appliance has a
polarized plug (i.e., one blade is wider than the other). Use only
a polarized plug, UL-listed (CSA certified in Canada) extension
cord recommended for outdoor use. A polarized plug will fit in a
4
Figure 2
3. Cord
4
5
6
7
8
G017928
Figure 3
7. Discharge chute handle
8. Discharge chute deflector
trigger
9. Discharge chute deflector
10. Belt cover (not shown)
11. Rotor blades
9
10
11