GE 339 Instruction Manual page 115

CHAPTER 4: ACTUAL VALUES
339 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Code
0xDD80
0xDDC0
0xE040
0xE080
0xE0C0
0xE140
0xE180
0xE1C0
0xE200
0xE240
0xE280
0xE2C0
0xE300
0xE340
0xE380
0xE3C0
0xE400
0xE440
0xE6C0
0xE700
0xE740
0xE780
0xE7C0
0xE800
0xEC40
0xF040
0xF3C0
0xF440
0xF480
0xF540
0xF580
0xF5C0
0xF600
0xF880
0xF8C0
0xF900
0xF940
0xF980
• The PKP messages will appear on the relay display as long as their respective flags are
active. The messages will disappear from the display, when either the protection
element drops out before operation, such as when the condition clears before
reaching operation, or when the protection element operates.
• The OP and BKR Status messages will appear on the relay display, when the respective
element operates, with the element function set to "TRIP", or "LATCHED ALARM". The
message will stay on the display after the condition clears, and will disappear upon
Reset command. If the element function is selected to "ALARM", or "CONTROL", the
message will disappear from the display, when the condition causing operation clears.
Type Definition
LE 15
LE 16
Therm O/L Blck
Gnd Fault BLK
Accel Block
UndrPower BLK
Output Relay 1 BLK
Output Relay 2 BLK
Mech Jam Block
U/Curr Block
UNBAL Block
RTD1 BLK
RTD2 BLK
RTD3 BLK
RTD4 BLK
RTD5 BLK
RTD6 BLK
RTD Trouble BLK
RTD7 BLK
RTD8 BLK
RTD9 BLK
RTD10 BLK
RTD11 BLK
RTD12 BLK
Self Test Blck
Ntrl IOC1 Block
NegSeq OV Block
Ph OV1 Block
Ph UV1 Block
UndrFreq1 Block
UndrFreq2 Block
OverFreq1 Block
OverFreq2 Block
Ph OV2 Block
Ph UV2 Block
S/C BLK
SPD2 S/C BLK
SPD2 U/C Block
A4 TARGET MESSAGES
4–37