10. Acs 611 Settings; Set Unit; Set Length Of Service Hoses; Contrast - Bosch ACS 611 Original Instructions Manual

10. ACS 611 settings

10.1

Set unit

!
Observe the ACS 611 menu prompting.
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "UNIT OF MEASURE" with o u and confirm
with E.
 kg/lb are displayed.
5. Select unit with o u and confirm with E.
"
Unit is set.
i
Return with <Stop>.
10.2

Set length of service hoses

!
Observe the ACS 611 menu prompting.
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message
ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "HOSES LENGTH" with o u and confirm with
E.
 Available lengths (2.5 m, 5 m, 7.5 m and 10 m)
are displayed.
5. Select hose length with o u and confirm with E.
"
Hose length is set.
i
Return with <Stop>.
10.3

Contrast

1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message ENTER CODE 0000
2222
and confirm with E.
3. Enter code
4. Select "CONTRAST" with o u and confirm with E.
 A numeric index is displayed on the screen
indicating the contrast level.
5. Adjust contrast with o u and confirm with E.
"
Contrast is set.
i
Return with <Stop>.
Robert Bosch GmbH
10.4
i
Optionally, special accessories for the cleaning
of vehicle A/C components can be connected for
ACS 611. If these special accessories are used, this
function must be activated in the selection menu.
1. Call up start screen.
is displayed. 2. Press <3> and <Flush> simultaneously and release.
 The message
3. Enter code
4. Select "FLUSHING" with o u and confirm with E.
5. Activate or deactivate with o u and confirm with E.
"
Flushing function is activated or deactivated.
i
Return with <Stop>.
10.5
i
In the event of faults the "oil charge" and "oil drain"
scales can be switched off to avoid blocking of the
unit.
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message
is displayed.
3. Enter code
4. Select "OIL SCALE" with o u and confirm with E.
5. Activate or deactivate with o u and confirm with E.
"
Oil scales are activated or deactivated.
i
Return with <Stop>.
10.6
1. Call up start screen.
2. Press <3> and <Flush> simultaneously and release.
 The message
3. Enter code
4. Select "UV DYE" with o u and confirm with E.
5. Activate or deactivate with o u and confirm with E.
is displayed.
"
UV dye filling is activated or deactivated.
i
Return with <Stop>.
!
In order to avoid problems due to chemical
incompatibility with the internal components of the
service device, dyes approved by Bosch are to be
used only.
ACS 611 settings | ACS 611 | 53

Flush (optional)

ENTER CODE 0000
2222
and confirm with E.

Scales for fresh and used oil

ENTER CODE 0000
2222
and confirm with E.

UV dye

ENTER CODE 0000
2222
and confirm with E.
S P00 D00 002
en
is displayed.
is displayed.
is displayed.
|
2013-04-10