Adjusting The Tilt - Canon J1 Service Manual

6
2)Check the tilt of rear side.
Upper side: Measure the distance [A] of the rear cover and the host machine.
Lower side: Measure the distance [B] of the rear cover and the host machine.
[A]: less than 2.8+/-1mm. [B]: less than 2.8+/-1mm. The difference of [A] and [B] is less than
1.5mm.
6
Installation > Adjusting the Tilt > Adjusting the Tilt
[A]
[B]
F-6-27
Installation > Adjusting the Tilt > Adjusting the Tilt

Adjusting the Tilt

1) Turn the dial from the bottom of the foot cover, and adjust the height.
A direction: Down, B direction: Up
To tilt the finisher to the finisher delivery side, turn the dial in [A] direction.
To tilt the finisher to the host machine side, turn the dial in [B] direction.
A:DOWN
B:UP
A
B : UP
A : DOWN
6-15
B
F-6-28
6-15