Advertisement
prechamber of the cartridge. This air pocket then gets sucked in by the print head
and requires a couple of cleaning cycles to clear it out. It is a pain.
Hold the paper feed button on the printer for 3 seconds. The cartridges will move
to the left position. Remove the Switch Activators (not the cartridges) and put
them right back in position, this reset the switches. The light or lights will not go
off. Push the paper feed button again and the cartridges will return to the right,
the printer will run one cleaning cycle and the lights will go off.
Let it finish the cleaning cycle, then run a nozzle check. If the nozzle check is
good, you are all set to continue printing. If the nozzle check is not good, then you
will have to run additional "nozzle check – cleaning cycles". Remember only do 3,
then print some purge4 pages and do 3 more if you have to. Always stop when you
get a good nozzle check.
S a v e
M o n e y
a n d
I m p r o v e
Y o u r
P r i n t i n g
MIS Associates Inc
2901 Auburn Rd
Auburn Hills, MI 48326
800-445-8296
http://www.inksupply.com
Fax: 248-289-6013
Email: sales@inksupply.com
Advertisement
