Specifications; General Description - Panasonic KX-NS700 Installation Manual

2.3.1 General Description

2.3 Specifications

2.3.1 General Description
KX-NS700
Main CPU
Power Input
Power Consumption (when fully
mounted)
Memory Backup Duration
Dialing
Mode Conversion
Ring Frequency
Operating
Environment
Conference Call Trunk
Music on Hold (MOH)
External Paging
LAN Port
Extension Connection Cable
36 Installation Manual
Cortex A8 600 MHz
100 V AC to 130 V AC: 2.2 A/200 V AC to 240 V AC: 1.3 A;
50 Hz/60 Hz
Normal rated power 104 VA
7 years
CO Line Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialing with Caller ID (FSK/DTMF)
1600 W Maximum
Extension Dial Pulse (DP) 10 pps, 20 pps
Tone (DTMF) Dialing with Caller ID (FSK)
Port 1-2 (on pre-installed MCSLC4) support PFT in combination
with the port 1-2 (on an LCOT6) connected to an analog CO
line respectively.
DP-DTMF, DTMF-DP
20 Hz/25 Hz (selectable)
Temperature 0 °C to 40 °C (32 °F to 104 °F)
Humidity 10 % to 90 % (non-condensing)
32 parties (Default) / 96 parties (DSP card installed)
(10 ´ 3-party conference call, 12 ´ 8-party conference call, etc.)
Internal MOH port: 8 ports (Level Control: 31.5 dB to +31.5 dB
per 0.5 dB)
External MOH port: 2 ports (Available exclusively with EPG
[External Paging])
MOH: Selectable Internal/External Music Source Port
Maximum 2 Ports (Volume Control: -15.5 dB to per 0.5 dB)
(Available exclusively with MOH)
1 (for LAN connection)
SLT
DPT
APT
PT-interface CS
PT-interface CS (High-density)
DSS Console and Add-on Key
Module
10BASE-T/100BASE-TX
(Auto MDI/MDI-X)
1-pair wire (T, R)
1-pair wire (D1, D2)
2-pair wire (T, R, D1, D2)
1-pair wire (D1, D2)
4-pair wire (D1, D2)
1-pair wire (D1, D2)
Document Version 2016-03