Description
Value Range
Default Value
SIP_ADD_DIVERSION_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
TRANSFER_RECALL_TIM
Value Format
Description
Value Range
Default Value
SIGNAL_COMPRESSION_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
MAX_BREADTH_n
Parameter Name Example
Value Format
Description
Value Range
Document Version 2016-05
Specifies whether to add the attribute "transport=udp" to the SIP
header URI.
•
Y (Add Transport UDP)
•
N (Do not add Transport UDP)
N
SIP_ADD_DIVERSION_1, SIP_ADD_DIVERSION_2, ...,
SIP_ADD_DIVERSION_16
INTEGER
Specifies whether to add Diversion header information.
0–2
–
0: Do not add Diversion header information
–
1: Use own diversion information only for the Diversion header
–
2: Add diversion information to existing Diversion header
0
INTEGER
Specifies the time that the original call is resumed when the
forwarding party does not response by Refer method for call transfer.
0, 1–240
0
SIGNAL_COMPRESSION_1, SIGNAL_COMPRESSION_2, ...,
SIGNAL_COMPRESSION_16
INTEGER
Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
•
0: Disable
•
1: Enable (Required)
•
2: Enable (Supported)
0
MAX_BREADTH_1, MAX_BREADTH_2, ..., MAX_BREADTH_16
INTEGER
Specifies the Max Breadth that is max Folk number at Proxy.
0–99 (0: Not add max-breadth header)
5.3.22 SIP Settings
Administrator Guide
245