Table of Contents
Advertisement
L05 User's Manual
CHANNEL
INPUT
MAJOR CHANNEL
MINOR CHANNEL
CHANNEL RING
LABEL
VIDEO BLANK
AUDIO MUTE
CHANNEL:
o Select the channel or input you wish to configure.
INPUT:
o When DIGITAL is selected two additional entries are added to the menu to
allow for mapping the digital channels.
MAJOR CHANNEL:
o MAJOR CHANNEL refers to the either the DIGITAL RF (USE CHANNEL
TABLE = NO) channel or the channel referred to in the digital channel table
(USE CHANNEL TABLE = YES).
MINOR CHANNEL:
o MINOR CHANNEL refers to the digital sub-channel related to the MAJOR
CHANNEL specified above.
CHANNEL RING:
o Specify whether the current channel or input is to be SAVED to or DELETED
from the channel ring (i.e., list of channels available for selection by means of
a standard guest remote control).
LABEL:
o Input a maximum of 8 characters for the channel's label. Cursor to the Right
to start the first character. Cursor left or right to navigate between character
positions within the label field. Cursor up or down to select characters from
the list:- A to Z, 0 to 9, . , ., .,/, :, =, ?, ;, <, >, @ or space. To edit, re-input the
character at its position. To exit, cursor left or right to navigate out of the label
editing field.
VIDEO BLANK:
o Specify whether video for the current channel is to be displayed (VIDEO
BLANK = NO) or not displayed (VIDEO BLANK = YES).
AUDIO MUTE:
o Specify whether audio for the current channel is to be audible (AUDIO
MUTE = NO) or muted (AUDIO MUTE = YES).
CABLE
Select either standard off-air tuning (CABLE TUNING = NO) or cable offset tuning
(CABLE TUNING = YES).
FACTORY CH RESET
Cursor Right will reset the channels programmed in memory.
Installing Digital Channels
CHANNEL INSTALL
13
091105.1833
TV 1 – 125
DIGITAL
0 – 999
0 – 999
SAVED
>
NO/YES
NO/YES
(NO / YES)
(>)
Advertisement
Table of Contents
