AMAX panel
5
Programming and operating the AMAX panel
The AMAX panel is programmed and operated through the installer or the user menu on a
keypad and/or through the remote programming software A-Link Plus on a PC.
When all modules and devices are installed, the AMAX panel indicates the system status
through the LED status indicator on the mainboard. A slow flashing in red (repeating on and
off with an interval of 1 second) indicates normal system operation.
The AMAX panel begins charging the battery. The green MAINS indicator on the keypad
indicates that the power supply is switched on and the keypad beeps.
4
The AMAX system provides two types of default access codes:
–
–
5.1
Option: Changing Menu Language
If necessary, the menu language can be changed. If not, proceed to section Accessing the
Menus, page 11.
1.
2.
3.
P
5.2
Accessing the Menus
Accessing the programming menu
1.
2.
3.
P
P
Accessing the user menu
4
P
P
5.3
Menu Navigation
This section provides an overview of how to navigate the programming menu of a text keypad.
Selecting a Menu
1.
2.
3.
Bosch Sicherheitssysteme GmbH
Press any key on the keypad.
The keypad stops beeping and you are prompted to enter a code.
Installer Code: [1234]
User Code: [2580] for master user 1 / [2581] for master user 2
Enter the installer code [1234] + [58] or the user code [2580] / [2581] + [58] and press
[#].
The available menu languages are displayed.
Select the desired language on the keypad.
Press [#].
The menu language is changed.
Confirm that the system is disarmed and that no alarm occurred.
Enter the installer code. The default setting for the installer code is [1234].
The system displays [958] PROGR. MODE [-EXIT].
Enter [958] + press [#].
You have now access to the programming menu for configuring the AMAX system.
The STAY and AWAY indicators flash to indicate the programming mode.
Enter a user code. The default users are master user 1 (code: [2580]) and master user 2
(code: [2581]).
The system displays [▼/▲] USER MENU *STAY #AWAY [-] INFO.
You have now access to the user menu for operating the AMAX system.
Select the menu and operate according to the menu prompt.
Press [▼] or [▲] to navigate to the desired menu.
Press [#] to enter a menu.
Quick Installation Guide
Programming and operating the AMAX panel | en
11
2016.05 | 06 | F.01U.309.297