Philips **HFL5011T/12 Installation Manual page 47

 Navigate to the [Network Type] menu and
open it
 You will see below items:
o [Wired]: Connect your TV wired to the
network, this is NOT the yellow
connector. The yellow connector is to
be used for Serial Xpress
o [Wireless]: Connect your TV wireless to
the network
o [WPS]: Connect your TV wireless to the
network using WPS
o [WPS with PIN code]: Connect your TV
wireless to the network using WPS with
PIN code
 Navigate to the [Network Configuration]
menu and open it
 You will see below items:
o [DHCP]: Use DHCP to configure your TV
o [Static IP]: Use Static IP to configure
your TV
 Navigate to the [Static IP Configuration]
menu and open it
 You will see below items:
o [IP Address]: Set your IP Address
o [Netmask]: Set your Netmask
o [Gateway]: Set your Gateway
o [DNS 1]: Set your DNS 1
o [DNS 2]: Set your DNS 2
Note: Above menus are only accessible
when in [Network Configuration] you have
selected [Static IP]
- 46 -