GE IC755CxS06RDx User Manual page 67

Mounting and Installation
For public disclosure
2. Verify that the gasket is present and properly seated in the bezel channel located on
the sides of the unit.
3. Insert the QuickPanel + into the mounting panel cutout.
4. Insert the hook of the mounting bracket into the mounting hole as displayed in the
following figure.
5. Tighten the screws on the mounting bracket in a clock-wise direction.
Torque Range for Mounting Clamp Screws
Display Unit
IC755CxS06RDx
IC755CxW07CDx
IC755CxS10CDx
IC755CxS12CDx
IC755CxS15CDx
Torque Range
0.3 Nm (2.66 in-lb)
0.3 Nm (2.66 in-lb)
0.7 Nm (6 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
GFK-2847R 67