Cisco ASA 5505 Hardware Installation Manual page 37

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

Chapter 3
ASA 5510, ASA 5520, ASA 5540, and ASA 5550
For more information about the Management port, see the management only command in the
Cisco Security Appliance Command Reference.
The ASA 5550 has a fixed configuration with an embedded 4GE slot as shown in
Figure 3-3
LNK
3
1 RJ-45 ports
2 RJ-45 Link LED
3 RJ-45 Speed LED
4 Power LED
5 Status LED
6 SFP ports
7 SFP Link LED
8 SFP Speed LED
1. GigabitEthernet ports, from right to left, GigabitEthernet 0/0, GigabitEthernet 1/0, GigabitEthernet 1/2, and
GigabitEthernet 1/3
2. Not supported at this time.
3. The management 0/0 interface is a Fast Ethernet interface designed for management traffic only.
4. GigabitEthernet interfaces, from right to left, GigabitEthernet 0/0, GigabitEthernet 0/1, GigabitEthernet 0/2, and
GigabitEthernet 0/3.
5. SFP ports, from right to left, GigabitEthernet 0/0, GigabitEthernet 1/0, GigabitEthernet 1/2, and GigabitEthernet 1/3
78-17374-01
Rear Panel LEDs and Ports for the ASA 5550
2
3
8
7
2
1
0
SPD
5
6
9
1
4
1
9
10 Management port
11 Network interfaces
12 Power indicator LED
13 Status indicator LED
5
14 Active LED
15 VPN LED
16 Flash LED
18
10
FLASH
LINK SPD
LINK SPD
LINK SPD
LINK SPD
3
2
1
0
12 14 16
11
13
15
2
USB 2.0 interfaces
3
4
Cisco ASA 5500 Series Hardware Installation Guide
Product Overview
Figure
3-3.
19
20
21
22
17
17 AUX port
18 External CompactFlash slot
19 Serial Console port
20 Power switch
21 Power indicator LED
22 Power connector
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5550Asa 5510Asa 5520Asa 5540

Table of Contents