Toshiba TOSVERT VF-AS3 Instruction Manual page 149

The output frequency changes to the frequency
command value set with <Sr1: Preset speed 1>
and becomes stable.
In the example on the right, it is 20.0 Hz.
The following are always displayed in the status
area on the upper side of the screen regardless of
display mode. (From the left)
• The icon is rotating
• Operation status "RUN"
• Output frequency (display contents vary
depending on the setting of the parameter)
• Run command icon
18 When you turn on relay 2 with relay 1 on, the
frequency command value of <Sr3> is enabled,
and the output frequency changes.
The output frequency changes to the frequency
command value set with <Sr3: Preset speed 3>
and becomes stable.
In the example on the right, it is 15.0 Hz.
19 When you turn off relay 1 with relay 2 on, the
frequency command value of <Sr2> is enabled,
and the output frequency changes.
The output frequency changes to the frequency
command value set with <Sr2: Preset speed 2>
and becomes stable.
In the example on the right, it is 10.0 Hz.
20 When you turn off the external switch, the motor
decelerates and stops.
Memo
• For details of preset speed operation, refer to [5. 2. 7].
Easy
Output frequency
0
[F]-[CC]
[S1]-[CC]
[S2]-[CC]
Easy
Easy
4-41
4. [Basic operation] Operation methods of motor
E6582062
RUN 20.0Hz
20:51
Standard Mode
20.0
Hz
Screen Copy Monitor
<Sr1>
<Sr3>
<Sr2>
Time
ON
OFF
ON
OFF
ON
OFF
RUN 15.0Hz
16:04
Standard Mode
15.0
Hz
Screen Copy Monitor
RUN 10.0Hz
16:05
Standard Mode
10.0
Hz
Screen Copy Monitor
3
4
9