Operating Commands - Bosch Solution 3000 Quick Reference Manual

12 en | Operating Commands
3

Operating Commands

The system supports programmable 1- 4- digit Installer code or User Code to execute the
following operating commands.
No identical User Codes are allowed. User Codes are not permitted to be the same as Installer
codes.
For [Code] + [Number] commands, the code must be 4-digit.
Master/User Function Description
Command
Code+[0][#] Arm/Disarm both areas
at the same time
Code+[1][#] Change or Delete User
Code and RF Keyfob
Code+[2][#] Change Domestic Phone
Number
Code+[3][#] Change Telco Arm/
Disarm Sequence
Code+[4][#] Setting STAY Mode 2
Zones
Code+[5][#] Turn Output On/Off
Code+[6][#] Setting the Date and
Time
Code+[7][#] Walk Test Mode
Code+[8][#] Event Memory Recall
Mode
Code+[9][#] Duress Disarm
Code+[*] STAY 1 Arm / Disarm
Or STAY 2 Disarm
Code+[#] AWAY Arm / Disarm
Code+[0][1] STAY1 Arm/Disarm Area
[*] 1
Or STAY2 Disarm Area 1
Code+[0][2] STAY1 Arm/Disarm Area
[*] 2
Or STAY2 Disarm Area 2
Code+[0][1] AWAY Arm/Disarm Area
[#] 1
2015.06 | 03 | F.01U.298.027
Access Installer
Command
(U) Code+[0][#]
(U) Code+[0][#]
(U) Code+[1][#]
(U) Code+[2][#]
(U) Code+[3][#]
(U) Code+[4][#]
(U) Code+[6][#]
(U) Code+[7][#]
(U) Code+[8][#]
(U) Code+[#]
(U) Code+[-]
(U)
(U)
(U)
(U)
Quick Reference Guide
Function Description
Add or Delete RF
Devices
Add or Delete RF
Repeaters / Keyfobs
(ICON codepad only)
Set Days until the First
Test Report
Change Domestic
Phone Number
Change Telco Arm/
Disarm Sequence
Setting STAY Mode 2
Zones
Enable Report Monitor
Mode
Walk Test Mode
Event Memory Recall
Mode
Enter Programming
Menu
Enter Programming
Menu
Bosch Security Systems, Inc.
Control Panel
Access
(I)
(I)
(I)
(I)
(I)
(I)
(I)
(I)
(I)
(I)
(I)