Unpacking Procedure - Canon Staple Finisher-H1 Service Manual

Unpacking Procedure

Unpacking Procedure
Caution:
Make sure that the host
machine is turned off and the
power plug is disconnected
from the outlet.
3) Remove all shipping tape and packing materials from the finisher.
6
Installation > Unpacking Procedure > Unpacking Procedure
1) Take out the three accessories and the packing material.
F-6-5
6 Installation > Unpacking Procedure > Unpacking Procedure
2) Take out the finisher by holding its sides indicated in the illustration
and place it on a flat surface.
F-6-3
6-3
F-6-4
6-3