Bosch amax 2100 Operation Manual page 37

AMAX panel
5.
6.
7.
8.
9.
10. Repeat step 9 if you want to enable multiple areas for the
11. Press [#].
12. Enter a (new) code with a default length of four digits. (A
13. Press [#].
14. Optionally enter a keyfob ID manually.
15. Press [#].
16. Optionally select the keyfob button 3 function.
17. Press [#].
P
4
Bosch Sicherheitssysteme GmbH
The available areas are shown. Already selected areas are
checked.
Use [▲] and [▼] to display all areas.
Enter the area number you wish to enable for the user or
enter [0] [0] if you want to enable all areas.
The enabled area is checked.
Repeat step 6 if you want to enable multiple areas for the
user.
Press [#].
The available macros are shown. Already selected macros
are checked.
Enter the macro number you wish to enable for the user.
The enabled macro is checked.
user.
code with five or six digits is also possible but has to be
enabled by the installer.)
Or
Press and hold [*] for three seconds to switch to the
KEYFOB ID: AUTO menu.
Trigger the keyfob to give alarm once.
The keyfob ID will be entered automatically.
The system beeps twice. The new user code is added/
changed.
Press [-] twice to exit.
Codes | en
2017.04 | 07 | F.01U.295.569
37