Controller; Controller Setting - Mitsubishi Electric GOT2000 Series User Manual

2.10 Controller

2.10.1

Controller setting

Configure controller settings.
The items which can be set are shown below. When each item part is touched, the respective setting becomes possible.
Function
Assign Ethernet I/F
Channel-Driver assign
Channel no. (Ch No.) setting
5 V power supply
Communication Detail Setting
2 - 48
2.10 Controller
Change the assignment of channel No. and communication driver name of the device connected using the
Ethernet interface.
Change the assignment of channel No. and communication driver name.
Set the channel numbers of the communication interface (Standard interface/Extend interface).
When connecting a controller to the RS-232 interface, whether to supply 5 V DC power or not to the controller
through 9 pins can be selected.
Set communication parameters of communication devices.
Description