Customizing The Copy Settings; Copy Settings Table; Changing The Current Standard Settings - Canon imageRUNNER 1750 Copying Manual

Customizing the Copy Settings

You can change the machine's default settings and customize them to suit your
needs. The settings you change and store in the Copy Settings in the Additional
Functions menu are not returned to the factory default settings even when
(Reset) is pressed. For instructions on how to restore the settings to the factory
default settings, see "Restoring the Default Copy Settings," on p. 4-6.

Copy Settings Table

4
The following table lists the settings in the Copy Settings menu.
Standard Settings
Initialize Copy Settings

Changing the Current Standard Settings

Standard Settings in the Copy Settings in the Additional Functions menu refers to a
combination of copy modes that is applied such as when the machine is turned ON
or when
the copy modes stored as the Standard Settings.
NOTE
The setting combination stored as Standard Settings is applied when:
- the machine is turned ON or wakes from the Sleep mode.
-
- the Auto Clear function initiates.
4-2
Customizing the Copy Settings
Item
Store, Initialize
Yes, No
(Reset) is pressed. This section describes the procedure for changing
(Reset) is pressed (except while copying).
Settings Page
p. 4-2
p. 4-6