Table of Contents
Advertisement
Listening to Music of a
Bluetooth Device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device's
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
PFUNCTION or F.
Appears "BT" and "BT READY" in the display
window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit appears as "LG AUDIO ND3520".
3. Enter the PIN code.
PIN code : 0000
4. When this unit successfully is connected with
your Bluetooth device, Bluetooth LED of this
unit lights up and appears "PAIR".
,
Note
Depending on the Bluetooth device type,
some device have a different pairing way.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device's user guide.
,
Note
y Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
y When you use the bluetooth function,
adjust the volume of a bluetooth device to
a proper level to listen to.
ND3520-NM.BUSALLK_1755_ENG.indd 17
,
Note
y After searching for this unit on your
Bluetooth device, pair the Bluetooth device
with this unit. Then play the file you want.
y The sound may be interrupted when
the connection interfered by the other
electronic wave.
y You cannot control the Bluetooth device
with this unit.
y Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y Although the distance between your
Bluetooth and the set is less than 10m, there
are obstacles between both, your Bluetooth
device cannot be connected.
y Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y You can enjoy wireless system using phone,
MP3, Notebook, etc..
y When not connected the Bluetooth, "BT"
and "BT READY" appears on the display
window.
y The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
y When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
y The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10m.
y If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
Operating
17
2
2012-09-05
2:34:46
Advertisement
Table of Contents
