Table of Contents
Advertisement
WV-S2231L / WV-S2211L
Model No.
WV-S2131L / WV-S2131
WV-S2111L / WV-S2110
* For information about the installation tasks, refer to the provided Installation
Guide. For information about how to perform the settings and how to
operate the camera, refer to the Operating Instructions on the provided
CD-ROM.
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Important Information
WV-S2131L
Before attempting to connect or operate this product,
Network Camera
WV-S2130
WV-S2131L
Advertisement
Table of Contents
Related Manuals for Panasonic WV-S2231L
Summary of Contents for Panasonic WV-S2231L
-
Page 1: Important Information
Important Information Network Camera WV-S2231L / WV-S2211L Model No. WV-S2131L / WV-S2131 WV-S2130 WV-S2111L / WV-S2110 WV-S2131L WV-S2131L * For information about the installation tasks, refer to the provided Installation Guide. For information about how to perform the settings and how to operate the camera, refer to the Operating Instructions on the provided CD-ROM. -
Page 2: Table Of Contents
Contents Limitation of liability ........................3 Disclaimer of warranty ........................3 Preface ............................4 About notations ..........................4 Main functions ..........................5 About the user manuals ........................ 6 System requirements for a PC ...................... 6 Trademarks and registered trademarks..................7 Copyright ............................ -
Page 3: Limitation Of Liability
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S). Disclaimer of warranty IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:... -
Page 4: Preface
The following notations are used when describing the functions limited for specified models. The functions without the notations are supported by all models. The functions with this notation are available when using the model WV-S2231L S2131L / WV-S2131L / WV-S2131... -
Page 5: Main Functions
This allows H.265 compression in addition to conventional H.264 compression technology, and when combined with Smart Facial Coding, reduces data load compared to our previous models. Panasonic's own intelligent auto (iA) feature provides increased discernibility even in environments with poor visibility... -
Page 6: About The User Manuals
About the user manuals Product documentation is composed of the following documents. • Important Information (this document): Provides basic information about the product. • Installation Guide: Explains installation, mounting, cable connections, and adjusting the field of view. • Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operate this camera. -
Page 7: Trademarks And Registered Trademarks
IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at http://security.panasonic.com/support/info/. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable. -
Page 8: Open Source Software
• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code. -
Page 9: Precautions
Precautions Do not insert any foreign objects. Do not attempt to disassemble or modify Fire or electrical shock may be caused if water this product. or any foreign objects, such as metal objects, Failure to observe this may cause fire or electric enter inside the unit. - Page 10 The screws and bolts must be tightened to [Precautions for use] the specified torque. When the product is accessible from the Failure to observe this may cause a drop Internet resulting in injury or accidents. To prevent unauthorized access, note the fol- lowing.
- Page 11 S2131L S2111L <WV-S2231L/ WV-S2131L /WV-S2211L/ We shall not be liable for content WV-S2111L> compensation, losses of recorded or edited content and any direct or indirect The mark of light-shielding parts left inside the...
- Page 12 AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A...
-
Page 13: Precautions For Installation
Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. For information about the installation tasks, refer to the provided Installation Guide. In order to prevent injury, the product... - Page 14 Screw tightening Router • The screws and bolts must be tightened When connecting this product to the Internet, use a broadband router with the port forward- with an appropriate tightening torque according to the material and strength of ing function (NAT, IP masquerade). Refer to the Operating Instructions on the pro- the installation area.
-
Page 15: Parts And Functions
(factory shipment: NTSC monitor) 12 V DC power supply terminal top (TOP) *1 Depending on the scanning application used, the Data Matrix may not be able to be read correctly. In this case, access the site by directly entering the following URL. http://security.panasonic.com/support/qr_sp_select/... - Page 16 【Camera body (continued)】 * This illustration represents WV-S2130 Built-in microphone S2130 Pan table fixing screw with washer Indicators and buttons Direction marker for installation (FRONT⇩) ☞ page 21) FRONT should face the camera front (the side of the Panasonic logo).
- Page 17 ■Terminals * This illustration represents WV-S2131L Network connector (RJ45) 1 2 V DC power supply terminal S2131L S2111L Audio output connector S2131L S2111L Audio input connector S2131L S2111L EXT I/O terminals S2131L S2111L MONITOR OUT terminal (factory shipment: NTSC monitor) ANetwork connector (RJ45) Connect an Ethernet cable (category 5e or better) to the network connector.
- Page 18 12 V DC power supply terminal S2131L S2111L Caution: A READILY ACCESSIBLE DISCONNECT DEVICE SHALL BE INCORPORATED TO THE EQUIPMENT POWERED BY 12 V DC POWER SUPPLY. ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY (UL 1310/CSA 223) or LIMITED POWER SOURCE (IEC/EN/UL/CSA 60950-1).
- Page 19 EXT I/O terminals S2131L S2111L Note: Off, input, and output of the external I/O terminal 2 and 3 can be switched by configuring the setting. Refer to the Operating Instructions on the provided CD-ROM for further information about the EXT I/O terminal 2 and 3 (ALARM IN2, 3) settings ("Off", "Alarm input", "Alarm output" or "AUX output").
- Page 20 When connecting to a network using a PoE hub Before starting the installation, check the entire system configuration. The following illustration gives a wiring example of how to connect the camera to the network via a PoE device (hub). *A microphone and speaker cannot be connected to WV-S2130 and WV-S2110. Powered speaker Adjustment monitor PoE device (hub)
- Page 21 ■Indicators and buttons S2131L INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) SD ON/OFF button LINK indicator SD ERROR/AF indicator AF button ACT indicator SD MOUNT indicator TELE button WIDE button SD memory card slot (SD) S2111L INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) SD ON/OFF button SD ERROR/AF indicator LINK indicator...
- Page 22 INITIAL SET button (Initializing / NTSC ⇔ PAL switch button) Follow the steps below to initialize the network camera. ⑴ Turn off the power of the camera. When using a PoE hub, disconnect the Ethernet cable from the camera. When using an external power supply, disconnect the power cable plug (acces- sory) from the 12 V DC power supply terminal.
- Page 23 SD ERROR/AF indicator S2131L S2111L When AF (Auto Focus) operation is being Blinks red (Interval of 1 time/ second) executed When the set is being started Lights red When an SD memory card is recognized normally Lights red → Lights off ...
-
Page 24: Insert/Remove An Sd Memory Card
Insert / remove an SD memory card WV-S2231L / WV-S2131L / WV-S2131 / WV-S2211L / WV-S2111L only Note: Refer to the Operating Instructions on the provided CD-ROM for further information about the SD memory card settings. ■ Insert an SD memory card 【１】... -
Page 25: Troubleshooting
S2111L Or install the software to format the SD memory card on the PC. Refer to our website (http://security.panasonic.com/support/info/) for further information about the supported software. • Isn't the inserted SD memory card faulty? Replace the card with a normal one. - Page 26 Reference Symptom Cause/solution pages • Check the following. • Grounding of the camera, a switching hub or peripheral devices are not done. • The camera is used near an electrical power line. • The camera is used near a device which produces Audio input contains strong magnetic field or radio waves (such as near noise.
-
Page 27: Specifications
DC 12 V S2131L S2111L PoE (IEEE802.3af compliant) Power consumption * WV-S2231L / WV-S2211L / WV-S2131L / WV-S2111L DC 12 V : 560 mA/Approx. 6.8 W PoE DC 48 V : 150 mA/Approx. 7.2 W (Class 0 device) WV-S2131 DC 12 V : 460 mA/Approx. - Page 28 Others: Tamper-resistant enclosure (WV-S2231L / WV-S2211L only *1 Refer to our website (http://security.panasonic.com/support/info/) for further information about Power source and Power consumption information. *2 The audio output can be switched to the monitor output. Refer to the "Operating Instructions" on the provided CD-ROM for descriptions of how to switch the output.
- Page 29 Max.1/250s, Max.1/120s, Max.1/100s, Max.2/120s, Max.2/100s, Max.3/120s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s *Max.2/100s and Max.3/120s are available during 30 fps mode only. WV-S2231L / WV-S2211L / WV-S2131L / WV-S2111L Color/BW: S2131L S2111L Off/ On(IR Light Off)/ On(IR Light On)/ Auto1(IR Light Off)/...
- Page 30 [4:3 mode] Horizontal: 25 ° (TELE) – 90 ° (WIDE) Vertical: 19 ° (TELE) – 66 ° (WIDE) WV-S2231L / WV-S2211L / WV-S2131L / WV-S2111L Adjusting angle: Horizontal: +120 ° to –240 ° Vertical: +85 ° to –30 ° Image tilt adjustment range: ±100°...
- Page 31 Image compression method * H.265/ H.264 Transmission priority: Constant bit rate / Variable bit rate / Frame rate / Best effort Frame rate: 1 fps/ 3 fps/ 5 fps*/ 7.5 fps*/ 10 fps*/ 12 fps*/ 15 fps*/ 20 fps*/ 30 fps*/ 60 fps* * The frame rate is limited to “bit rate”.
-
Page 32: Optional Accessories
CD-ROM and refer to “Notes on Windows / Internet Explorer versions”. *6 Refer to our website (http://security.panasonic.com/support/info/) for latest information about the compatible SD memory cards. *7 When repeatedly recording images on an SD memory card using the auto overwrite function, make sure to use an SD memory card with high reliability and durability. - Page 33 Two Riverfront Plaza, Newark, NJ 07102-5490 Panasonic Testing Centre Panasonic Canada Inc. Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca © Panasonic System Networks Co., Ltd. 2016 av1016-1116 PGQP2288YA...