Connecting To A Computer; Pc/Macintosh; Connecting To An External Monitor - Philips bClever SV1 User Manual

Philips Multimedia Projector
4. Installation
PROJECTOR PROJECTOR
For external monitor
connection only
2
4
5
5
3 2
COMPUTER COMPUTER
1
Data out

PC/Macintosh

Connect the Data (out) socket of the computer to the Data socket of the projector and
1
secure the plugs by tightening the thumb screws.
For this, use the VGA cable supplied (1).
Select 'Data' as input source using the Source button on the projector or the Source
2
selection buttons on the remote control.
You can also select 'Data' in the 'Features' menu. See 'On Screen Display Menu' - 'General
explanation' on how to navigate through the menu.

Connecting to an external monitor

Connect the VGA Y connector marked 'Projector' (2), of an optional VGA Y-cable, to the
1
Data socket of your projector.
Connect the VGA Y connector marked 'Computer' (3) to the VGA cable supplied (1).
2
Connect the VGA Y connector marked 'Monitor' (4) to the VGA cable of the external
3
monitor (5).
Switch on your Computer and projector.
4
Press the Data button on the remote control.
5
Press Menu.
6
– The menu bar appears on the screen.
The 'Picture' item is highlighted.
15
Connecting to a computer >
2
2
Data S-VIDEO VIDEO AUDIO-L
AUDIO-R
FILTER
VGA/MAC adapter
Mac/PC
English User guide bClever SV1