Download Print this page

LG 42lk530 Service Manual page 17

Hide thumbs Also See for 42lk530:

Advertisement

6. HDMI ARC Function Inspection
6.1 Test equipment
- Optic Receiver Speaker
- MSHG-600 (SW: 1220
↑)
- HDMI Cable (for 1.4 version)
6.2 Test method
(1) Insert the HDMI Cable to the HDMI ARC port from the
master equipment (HDMI1)
(2) Check the sound from the TV Set
(3) Check the Sound from the Speaker or using AV & Optic
TEST program (It's connected to MSHG-600)
* Remark: Inspect in Power Only Mode and check SW version
in a master equipment
6.3 Ship-out mode check (In-stop)
• After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
Copyright
LG Electronics. Inc. All right reserved.
Only for training and service purposes
7. AUDIO output check
7.1 Audio input condition
(1) RF input: Mono, 1KHz sine wave signal, 100% Modulation
(2) CVBS, Component: 1KHz sine wave signal (0.4Vrms)
(3) RGB PC: 1KHz sine wave signal (0.7Vrms)
7.2 Specification
Item
Audio practical max Output, L/R
(Distortion=10% max Output)
8. GND and Hi-pot Test
8.1. Method
8.1.1. GND & HI-POT auto-check preparation
(1) Check the POWER CABLE and SIGNAL CABE
insertion condition
8.1.2. GND & HI-POT auto-check
(1) Pallet moves in the station. (POWER CORD / AV
CORD is tightly inserted)
(2) Connect the AV JACK Tester.
(3) Controller (GWS103-4) on.
(4) GND Test (Auto)
- If Test is failed, Buzzer operates.
- If Test is passed, execute next process (Hi-pot test).
(Remove A/V CORD from A/V JACK BOX)
(5) HI-POT test (Auto)
- If Test is failed, Buzzer operates.
- If Test is passed, GOOD Lamp on and move to next
process automatically.
8.2. Checkpoint
• TEST voltage
- GND: 1.5KV/min at 100mA
- SIGNAL: 3KV/min at 100mA
• TEST time: 1 second
• TEST POINT
- GND TEST = POWER CORD GND & SIGNAL CABLE
METAL GND
- Internal Pressure TEST = POWER CORD GND & LIVE &
NEUTRAL
• LEAKAGE CURRENT: At 0.5mArms
- 17 -
Min Typ Max
Unit
Remark
9.0
10.0
12.0
W
(1) Measurement condition
8.5
8.9
9.9
Vrms
- EQ/AVL/Clear Voice: Off
(2) Speaker (8ü Impedance)
LGE Internal Use Only

Advertisement

loading