Operating Instructions - Haier HI50IB20SS User Manual

oPERAtIon InStRUctIonS
fInAl cHEck lISt BEfoRE
oPERAtIon
1. Have all packing materials and tape
been removed from the interior and
exterior of the ice maker?
2. Did you clean the ice storage bin?
3. Have the installation instructions
been followed, including connecting
the machine to water and electricity?
4. Has the machine been leveled?
5. Is the ice maker in a site where the
ambient temperature is between 50°F
(10°C) and 100°F (38°C) and the water
temperature between 41°F (5°C) and
90°F (32°C) all year- round?
Ice making stage
operating Method
1. Turn on the water tap, let the water
trough fill, then press the ON/
OFF button on the front panel.
The ice maker will start working
automatically.
2. After 3 minutes, the machine will
automatically go to the ice-making
stage, and the sound of water flowing
will be heard.
3. When the batch of ice has been fully
formed, ice will automatically be
harvested to the ice storage bin.
4. When the ice storage bin is full, the
sheet of cubes will not fall completely
and will hold the bin-full probe open.
The machine stops making ice
automatically.
6. Has the water supply pressure been
checked to ensure a minimum of 15
psig with a static pressure not to
exceed 80 psig?
7. Is there a clearance of at least 4" (102
mm) at the rear, and 1" (25 mm) at top
and sides for proper air circulation?
8. Has the power supply voltage been
checked or tested against the
nameplate rating? And has proper
grounding been installed in the ice
maker?
9. Is the ice maker plugged in?
10. Have you turned on the main water
supply and tap?
11. Have you checked for leaks at all
water supply connections?
Ice harvest stage
5. The unit will start making ice again
after the ice cubes are removed.
Then the bin-full probe swings back
to operating position.
IMPoRtAnt:
• Although the unit has been tested
and cleaned at the factory, due to
long-term transit and storage, the first
batch of cubes must be discarded.
• Never turn the water supply tap off
when the ice maker is working.
• Never touch evaporator when unit is
running!
• Except to take ice from the unit, keep
the door closed to reduce melting and
insure proper ice formation.
Page 14 • Set uP & uSe
Bin full stage