Motorola MOTORIZR Z6tv Service Manual page 53

Level 1 and 2 Service Manual
6809513A80-B
37. Place the display/hydraflex onto the slider assembly. Route the PCB connector
flex through the magnesium opening and manually feed the entire flex so that
the speaker lays on the speaker pocket on the top of the slider inner.
Figure 61. Installing the Hydraflex
38. Place the upper ground clip over the flex and screw holes on the magnesium
inner. Secure the clip with the two thread forming screws. Use the T5 driver
to tighten the screws to a torque setting of .7 in Lbs.
Figure 62. Installing the Upper Grounding Clip
February 19, 2008
Screw
Upper grounding clip
Screw location
Disassembly
v513341
v463422
53